Following this link will transfer you to shop.wallcannrewards.com where you can add this item to your cart, browse other products, choose your shipping options, and select from several payment options.
When purchasing using your credit card, please note that your card statement will identify the merchant as 'WallCann'
Redarc |
DC/DC Battery ChargerThe BCDC-1206 is a three stage 12V DC-DC battery charger that operates with an input of between 9 and 32V. The input voltage of the BCDC-1206 can be above, below or equal to the output voltage making it ideal for charging an auxiliary 12V battery where the distance from the main battery may cause a significant voltage drop. Free Shipping Australia Wide.
|
FUNCTION
The BCDC-1206 is a three stage 12V DC-DC battery charger that operates with an input of between 9 and 32V. The input voltage of the BCDC-1206 can be above, below or equal to the output voltage making it ideal for charging an auxiliary 12V battery where the distance from the main battery may cause a significant voltage drop. The wide operating voltage range provides a simple solution to charging trailer mounted batteries. The BCDC-1206 can deliver sufficient current to charge a battery that has a typical DC compressor fridge connected.
When the BCDC-1206 is turned on it will start in Boost mode, Boost mode maintains a constant current until the battery voltage reaches 14.5V. The charger will then convert to Absorption mode, maintaining the voltage at this level for a predetermined period of time; after which it will enter Float mode. Float mode maintains 13.7V on the battery being charged until a load on the battery causes the battery voltage to drop below 12.2V when it then re-enters Boost mode.
FEATURES
- Compact in size
- Over current and short circuit protection
- High operating temperature range up to 70°C
- Over temperature protection
- Input under voltage shutdown
- Input over voltage shutdown
- Led indication of output mode
SPECIFICATIONS
| DC input voltage range: | 9 ~ 32V for continuous operation |
| Absorption voltage: | 14.5V |
| Float voltage: | 13.7V |
| Boost commencement voltage: | 12.2V |
| No load current (Ignition switched on): | < 100mA |
| Standby current (Ignition switched off): | < 150μA |
| Input protection: | Reverse polarity by external fuse (Fuses required 10A on input, not supplied) |
| Output protection: | Output over-current and short circuit protection. |
| Reverse polarity by external fuse (Fuses required 7.5A on output, not supplied) | |
| Maximum continuous output current: | 3.5 ~ 6.5 A (input voltage dependent) |
| Connector: | Input Positive |
| Common Negative input | |
| Output Positive | |
| Ignition Positive | |
| Standards: | AS/NZS CISPR11:2004 (CISPR 11 ED. 4.1) |